• Excellent price to performance ratio
• Versatile machine can be used to process a wide range of materials
• Easy, menu guided operation and programming requires minimal training
• Due to precision cutting unit, even very thin materials can be cut clean and square
• Applicable to cut Heat shrink tube, Hose, Rubber,Tin/Copper plate, wire, Braided wire, Paper, Silicon tube, Film, Vinlyl, etc.

It is a pneumatic wire stripping machine for stripping discrete wires and small multi-conductor cables.
Operating the wire stripping machine is extremely simple.
Pneumatic control, easy operation.

Automatic wire cutting and stripping machine is suitable for wire and cable processing range from AWG#28 to AWG#10.
1. Fast stripping speed.
2. High precision in cutting and stripping.
3. Easy to debug and easy to operate.

• Stroke: 30mm / 40mm
• Pressure: 20KN
• Shut height: 121.7mm / 135.78mm
• Weight: 75kg

• Model: TM-200SC
• Power supply: 220V-240V 50/60Hz
• Air source: 0.4～0.6Mpa
• Stripping length: 1.0～10.0mm

• Model: ACC-101
• Power supply: 50/60HZ 220V single phase
• Processing range: AWG#18-AWG#30
• Processing length: Twisted 20-9999mm, Untwisted 8-9999mm

• Model: HSM-60
• Input Voltage: 110V/220V AC
• Width of Heating Antrum: 77mm
• Diameter of Heating Antrum: 32mm

STB-10 can greatly improve the quality and efficiency of taping, save personnel, save tape. The number of turns can be adjusted, fast taping speed, strong adaptability to tape.

The equipment can be integrated with ultrasonic welding machine and other joint processing equipment. One operator can operate welding machines and integrated taper.

• Easy to operate;
• Response speed is very quick;
• Micro operating system can effectively guarantee the stability and accuracy of test results;
• Data transmission can be equipped with various communication interfaces.

• Universally employable due to standard possibility to accept cable reels and loose cable rings alike
• Automatic control of wire feeding speed and driving by servo motor
• Utilization of wire tray enables easy cable management at the time of storage
• At the time of bobbin wire use, changeover time can be shortened by automatic wire winding-up mechanism
• Bundled wire rotation speed is selectable from 3-step, enabling to correspond to high-speed wire feed

• Compact solution for shield processing
• Exact servo-controlled positioning
• Rapid product changeover through easy-to-manage, configurable recipes
• Secure protection of the inner conductor when trimming shield